74 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
6.23. Print Speed Adjustment
This function is used to change the print speed (adaptation to the
actual used materials, e.g. to optimize the contrast of the printout).
The setting range for the print speed is 4 inch/s to 12 inch/s.
ON LINE
↵
PROG ESC
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
Panel display
[ON LINE ]
[OFF LINE ]
[Menu level 1 ]
[Engine ]
[Paper Move ]
[Printspeed ]
[ 8 inch/s ]
[ 4 inch/s ]
[ 4 inch/s ]
Notes
Turn the printer OFF LINE with this
key.
The PROG ESC key gives the user
access to the menu structure.
Press the FEED
s
or CUT
t
key until
[Engine ] is displayed.
Press the FEED
s
or CUT
t
key until
[Printspeed ] is displayed.
The currently set value is displayed.
Press the FEED
s
or CUT
t
key until
the desired value is displayed.
Here the print speed is reduced to 4
inch/s.
Turn the printer ON LINE again:
Press the ON LINE
↵
key longer
than 2 seconds.
Summary of Contents for LOGIJET T4
Page 108: ......
