56 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
6.8. Hexdump-Mode Activation
Within the Hexdump-Mode the printer prints all characters received
via interface without any interpretation (hexadecimal coded).
This mode helps with error diagnosis. The Hexdump-Mode can be
activated only temporarily.
ON LINE
↵
PROG ESC
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1
]
[Status Sheet ]
[Hexdump
]
[Hexdump ]
Notes
Turn the printer OFF LINE with this
key.
The PROG ESC key gives the user
access to the menu structure.
Menu level 1 is selected.
Press the FEED
s
or CUT
t
key until
[Hexdump ] is displayed.
The Hexdump-Mode is activated.
Turn the printer ON LINE again:
Press the ON LINE
↵
key longer
than 2 seconds.
Note:
By activating the normal print mode (see next chapter) or by
turning the printer off and on again the printer can be taken out of
Hexdump-Mode. Time between turning the printer off and on again
should be at least 15 seconds.
Summary of Contents for LOGIJET T4
Page 108: ......
