Handling of Consumables 27
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
5.
Place an empty ribbon sleeve onto the left mandrel (2).
6.
Feed the ribbon end between the printhead bracket and the
material contact roller (3).
7.
Then pull up the ribbon and drape it over the guide
mandrel (compare Fig. 4.3.1.b).
8.
Feed the ribbon under the take-up mandrel (4) and secure it
to the ribbon sleeve (turn up the ribbon once so that the
adhesive part at the beginning of the ribbon can be used).
ribbon sleeve
take-up mandrel
guide mandrel
Fig. 4.3.1.b Securing the ribbon to the ribbon sleeve
9.
Check that the ribbon has no folds and is running straight.
If necessary, tauten the ribbon by turning the take-up
mandrel in a counter-clockwise direction (5).
Summary of Contents for LOGIJET T4
Page 108: ......
