Handling of Consumables 25
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
4.2.2. Media Removal
1.
Switch the printer to OFF LINE mode.
2.
Open the hood of the printer.
3.
Press the lift lever to remove the material (see chapter 4.1:
Item 20 in the Winding Diagram) and at the same time pull
away the material to the rear.
The material can also be expelled from the rear of the printer
module by using the panel function Paper Feed (see
Menu Structure in chapter 5).
4.
Rotate the media unwinder including the tear-off roll-fed
media clockwise until the free end is winded up.
5.
Remove the roll with the tear-off roll-fed media (if necessary
protect the media against unintentional unwinding first).
6.
Close the hood of the printer.
Summary of Contents for LOGIJET T4
Page 108: ......
