78 Panel Functions
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
6.26. Setting the Sync Sensor Mode
With this function the gap detection mode is selected. The default setting is
‘Automatic’. The ‘Manual’ mode enables the processing of materials with
several varying contrast zones, which would otherwise falsely be measured as
gaps. With the help of the accompanying panel function Sync.Sens.Level and
Sync.S.Sensitiv. (see the following chapters) the contrast value measured by
the gap detection can be defined specifically for the label material.
ON LINE
↵
PROG ESC
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
PROG ESC
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
[Engine ]
[Paper Move ]
[Sync.Sens.Mode ]
[Automatic ]
[Manual ]
[Manual ]
Notes
Turn the printer OFF LINE with this
key.
The PROG ESC key gives the user
access to the menu structure.
Press the FEED
s
or CUT
t
key until
[Engine ] is displayed.
Press the FEED
s
or CUT
t
key until
[Sync.Sens.Mode ] is displayed.
The currently set value is displayed.
Press the FEED
s
or CUT
t
key until
the desired sensor mode is displayed.
The sensor mode manual is chosen.
The adjusting of the Sync sensor level
is described in the following chapter.
Summary of Contents for LOGIJET T4
Page 108: ......
