Troubleshooting 105
_______________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator‘s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
8.3. Incorrect Media Transport
Defect
Remedies
Incorrect media transport
(no gap detection between
labels e.g.)
- perform the basic operations
(see chapter 3)
- check if the media has been loaded
correctly
(compare chapter 4.2)
- check if the ribbon has been loaded
correctly
(compare chapter 4.3)
- clean the sensors
(see chapter 7.1.3)
- clean the transport rollers
(see chapter 7.1.4)
No straight transport of the
consumables
(torsion or folding of the
ribbon, e.g.)
- check if the ribbon has been loaded
correctly
(compare chapter 4.3)
- check if the media has been loaded
correctly
(compare chapter 4.2)
Paper Jam
in addition to the remedies above:
- operate the fan lever for the contact rollers
to remove the paper
(see chapter 4.1)
- use the panel function Lift Printhead
to lift the printhead
(see chapter 5.6 Menu Structure)
- check if the jammed consumables have
been removed completely
If the remedies above are not successful, please call a MICROPLEX
authorized service engineer.
Summary of Contents for LOGIJET T4
Page 108: ......
