Control Panel
45
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
Functions / Changing of function values:
FEED
Ù
CUT
Ú
Within one function the value can be changed by pressing the
key FEED
s
or CUT
t
.
The digit to change can be selected by pressing the CUT
t
key.
(This moves you to the next position of the function value).
ON LINE
↵
3 x
ON LINE
↵
By pressing the ON LINE
↵
key the function values currently
displayed are confirmed resp. the selected function is activated
(the changes are stored temporary).
To select such changes permanently, the user must terminate the
change of function by pressing the ON LINE
↵
key three times.
These permanent changes in printer configuration are active each
time the printer is turned on again.
Return to the ON LINE mode:
ON LINE
↵
A)
In one step:
Pressing the ON LINE
↵
key longer than 2 seconds switches the
user directly to the ON LINE mode from nearly any menu
position.
PROG ESC
ON LINE
↵
B) Return to the ON LINE mode step by step:
Pressing the PROG ESC key takes the user to the respective
previous menu level. Aim is to jump back to the OFF LINE mode.
The name of the printer is shown on the display, when this mode
is reached (e.g. [SOLID T8 ]).
The ON LINE
↵
key switches the user to the ON LINE mode if
the printer is in the OFF LINE mode.
Summary of Contents for LOGIJET T4
Page 108: ......
