Panel Functions
51
________________________________________________________________________________________________
_______________________________________________________________________________________________
MICROPLEX
Operator’s Manual SOLID T4 / T5 / T6 / T8
Edition 2.0
6.4. Material Width Adjustment (Paper Width)
The paper width (print width) has to be adjusted with this function
according to the currently used format.
ON LINE
↵
PROG ESC
FEED
Ù
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
FEED
Ù
ON LINE
↵
ON LINE
↵
Panel display
[ON LINE ]
[OFF LINE ]
[Menu Level 1 ]
[Paper Menu ]
[Page Length ]
[Paper Width ]
[in mm ]
[Digit1 210.3]
[Digit1 210.0]
[Digit1 210.0]
Notes
Turn the printer OFF LINE with this key.
The PROG ESC key gives the user
access to the menu structure.
Press the FEED
s
or CUT
t
key until
[Paper Menu ] is displayed.
Press the ON LINE
↵
key to select the
paper menu.
Press the FEED
s
or CUT
t
key until
[Paper Width ] is displayed.
Press the ON LINE
↵
key to adjust the
format width to the paper width.
mm = currently selected measuring unit.
(Alternative the units inch or dot can be
chosen with FEED
s
or CUT
t
).
Pressing the FEED
s
key changes the
value of the current position (Digit1 =
last position, in this example: 3).
Pressing the CUT
t
key switches to the
next digit.
The format width (paper width) is
changed to 210.0 mm.
Turn the printer ON LINE again:
Press the ON LINE
↵
key longer than
2 seconds.
Summary of Contents for LOGIJET T4
Page 108: ......
