Page 51
Software Configuration
thermoIMAGER TIM Connect
Optional: Change the title name using the start parameter in the TIM Connect software, see Chap.
4.6.1
.
Start the software using the new software icon.
Link a camera to the new software instance in the TIM Connect software.
In order to set up th last step please go to menu
Tools
,
Configuration
and
Device
and select in
Application start
the favored imager for the respective software instance, see Chap.
Fig. 49
.
Fig. 49 View Application start
Starting the software via the new desktop icon the linked imager will be displayed automatically. SN is the se-
rial number of the individual camera.
Note that each camera can only be linked once with a software instance.
i
Note that each camera can only be linked once with a software instance.
Otherwise the software will not start the automatic connection to the termoIMAGER TIM.
It is recommended to connect at first one camera and to do the steps 1 till 5 and afterwards start with the
second camera etc., so that no possible interference is caused.