manualshive.com logo in svg

MICRO-EPSILON thermoIMAGER TIM, Operating Instructions Manual

Share
Download
MICRO-EPSILON thermoIMAGER TIM Operating Instructions Manual Download Page 9

Page 9

Getting Started

thermoIMAGER TIM Connect

3. 

Getting Started

3.1 

Software Installation

  Please install at first the software TIM Connect from the CD.

The CD contains the software application, the specific calibration data of the imager as well as some sample 
files. These data will be installed automatically.

  Insert the installation CD into the according drive on your computer. 

If the autorun option is activated the installation wizard will start automatically. 

  Otherwise please start setup.exe from the CD-ROM. 
  Follow the instructions of the wizard until the installation is finished. 

At the end of the installation, you will get an overview of what has been added, changed and corrected in 
the current software version. You will find this overview again on the data medium under the document name 

Changelog.

Summary of Contents for thermoIMAGER TIM













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands