Page 90
Data Processing
thermoIMAGER TIM Connect
If a temperature value shall be used as an pre-alarm, you need to tag the
Pre-alarms
option. The alarm can
also be put out via the Process Interface (PIF) using the
Alarm to PIF
option.
i
If activating the
Alarm Appl.
, a red alarm button on the toolbar appears. You can deactivate the visual
and acoustic alarm by clicking on the alarm button. The alarm will stay deactivate until the alarm value
is reached again.
In the
Alarm configuration
window you can set an
Audible alarm, see
Fig. 90
. In the
Inter-
val [sec]
input box you can specify the time interval the sound appears. Via the
Path to sound file
you can
Browse
an individual *.wav file. The acoustic alarm signalization can be repeated in defined intervals
setting the
Interval [sec]
.
Using the option
Recording on alarm, see
Fig. 91
,
you can specify a
Delay [sec]
. The recording
starts after the delay time is over. In the
Duration [sec]
box the recording time of the video sequence can
be set.
Fig. 90 View Audible Alarm
Fig. 91 View Recording on alarm
