Page 133
Further Information
thermoIMAGER TIM Connect
11.
Further Information
11.1
Options
Under
Tools
,
Extended
and
Options
, you can make further settings, which are explained in the following.
11.1.1 Activating Software Messages
At some point a warning message will appear when performing an action that would cause changes to
software settings.
To prevent unintended changes you can activate or deactivate these messages.
i
If a message appears you can disable the window by choosing „Never ask me again“.
Using the menu
Options
you can activate the appearance of the window again.
Important options are:
Warning if device was disconnected
A window tells the user that a device was disconnected.
Warning if unsaved data exists
If activated a reminder will appear to warn you on unsaved data
or setups before shutting down the software.
Ask for stopping triggered recordings…
Opening the configuration dialog you will be asked whether to
close a triggered data capturing or not. The message intends to
prevent changing trigger settings by accident.
