Page 97
TIM 8/40
thermoIMAGER TIM Connect
7.2.2
Process Interface (PIF) for TIM 8
Using Tools, Configuration and Device PIF menu you can configure a PIF which is connected to the camera.
The number of in- and outputs can vary depending on the connected PIF type (internal PIF or stackable PIF).
An available in- or output will be marked with a green checkmark . A not available in- or output will be
marked with a red X. With Set number of ports like connected device, only the available inputs/outputs are
displayed.
If you configure an analog value an addi-
tional window will show up if you press the
Setup
button. In this window you can scale
the in- or output:
The settings for the stackable PIF are similar to those for the internal PIF. Under
PIF type
,
Stackable PIF
must first be selected. Furthermore, the number of PIFs used must be specified under
Devices
. The device
number must be identical to the RS485 address set on the device. Now the existing inputs and outputs can
be assigned with corresponding functions.
