Page 12
Getting Started
thermoIMAGER TIM Connect
1 IR image from the camera
2 Temperature profile: Shows the temperatures along max. 2 lines at any size and position in
the image.
3 Control displays: Displays all temperature values in the defined measure areas like Cold
Spots, Hot Spots, temperature at cursor, internal temperature and chip temperature.
Alarm settings: Bar showing the defined temperature thresholds for low alarm value (blue
arrow) and high alarm value (red arrow). The color of numbers within control displays
changes to red (when temp. above the high alarm value) and to blue (when temp. below
the low alarm value).
4 Temperature of measure area: Analyses the temperature according to the selected shape,
e.g. average temperature of the rectangle. The value is shown inside the
IR image and the control displays.
5 Reference bar: Shows the scaling of temperature within the color palette.
6 Temperature time diagram: Shows the temperature curves over time for selectable region of
interest (ROI)
7 Histogram: Shows the statistic distribution of single temperature values.
8 Automatic / manual scaling of the palette (displayed temperature range): Man., </> (min,
max), 1
s:
1 Sigma, 3
s
: 3 Sigma, OPT: Palette optimization
9
Distance function: Adjustment of the motor focus to focus the IR picture (only TIM 8/40)
10 Menu and Toolbar (Icons)
11 Icon enabling switching between color palettes
12 Status bar: Model and serial number, optic, temperature range, cursor position, device
framerate/ display framerate, emissivity, ambient temperature, flag status
Under
View
and
User Mode
you can select between two additional display options. In addition to the
Desk-
top
view, the
Touch
view or the
Tablet
view can also be used here, see
Fig. 1
.
