Seite 120
Anhang | ASCII Communication with Sensor
optoNCDT 1750
A 3.2.5.4
BASICSETTINGS, Load / Save Device Settings
BASICSETTINGS READ | STORE
- READ: Loads the stored device settings from the sensor.
- STORE : Saves the current device settings in the sensor.
A 3.2.5.5
SETDEFAULT, Factory Settings
SETDEFAULT ALL | MEASSETTINGS | BASICSETTINGS
Resets the sensor to factory settings.
- ALL: Deletes measurement and device settings and loads the standard preset for the measurement set-
tings or the default parameters for the device settings.
- MEASSETTINGS: Loads the measurement settings and deletes the standard presets loaded.
- BASICSETTINGS: Deletes the device settings and loads the default parameters.
A 3.2.6
Analog Output
A 3.2.6.1
ANALOGRANGE
ANALOGRANGE [0-5V|0-10V|4-20mA]
Sets the type of the analog output.
A 3.2.6.2
ANALOGSCALEMODE, Scaling the Analog Output
ANALOGSCALEMODE STANDARD|TWOPOINT
Choice of the scaling type of the analog output.
- STANDARD: using the measuring range of the sensor
- TWOPOINT: two-point scaling within the analog range
Minimum value: measurement value in mm which is matched to the lower analog value,
Maximum value: measurement value in mm which is matched to the upper analog value.
i
The minimum value (in mm) can be higher than the maximum value (in mm), see Chap.
.
Summary of Contents for optoNCDT 1750
Page 139: ......
