Michell Instruments XZR500ST, User Manual

Page: 16 / 78

XZR500 User’s Manual
8 97137 Issue 8, April 2017
INTRODUCTION
1.3.2 Optional Equipment
• Tubular counter- fl ange for fi xing the probe to the stack (see Appendix G)
• Flange insulation (to prevent condensation forming)
• Extra length of cable (up to 100 meters)
• Calibration and veri fi cation kit
• Back fl ushing system: for cleaning the probe tubes when fl ue gases are
very dusty (see Appendix E)
• Flue gas ejector system with heating (see Appendix F)
• Rear insulation
1.3.3 Options
• Self-calibration
• 115 V / 60 Hz power supply
• RS232 interface (see Appendix B)
1. Transmits all data straight from/to a computer terminal, i.e: O
2
concentration, furnace temperature, MSRS voltage, ambient
temperature and pressure.
2. Allows the setting of test gas value and starting the analyzer
calibration sequence.
3. Allows the changing of the alarm type, level and hysteresis, the
fail safe value, setting of the furnace temperature, the upper
scale adjustment, the signal output and scale, and starting the
self cleaning.