Michell Instruments XZR500ST, User Manual

Page: 64 / 78

XZR500 User’s Manual
56 97137 Issue 8, April 2017
APPENDIX F
1.5 mm 2 Brown
1.5 mm
2
Brown
1.5 mm 2
Brown
1.5 mm
2
Brown
1.5 mm 2 Bl u e
1.5 mm
2
Bl u e
1.5 mm 2
Bl u e
1
1
1
2
2
2
L 1 3+
T1 4 -
3
3
4
4
5
5
5
R e gu lator
C B100
11 12
F 1
6 A
Gr
een
Whit
e
C o mp ensate d cable
T C - K
C onnector
T C - K
6
6
230 V /6 A Supp l y To the heatin g ins u lator
Figure 22
Enclosure for Controlling the Ejector Heating - General Wiring Diagram
Con fi guring the CB100 temperature regulator:
• Verify the display when powering up the regulator.
• To adjust the set point at 200°C, press the SET key and scroll with the
scroll keys.
• Cancellation of the alarms:
- Press the “SET” key during 2 seconds
- Get to “LCY”, enter code “1000”
- Press the “SET” key during 2 seconds
- Press the “SET” and R/S” keys: at “CODE”, enter code “0000”
- Get to S L 4, enter code “0000”
- Get to S L 5, enter code “0000”
• Adjustment of high threshold, still in the con fi guration menu:
- Validate with the “SET” key up to “CODE”, enter code “1”
- Press the “SET” key
- At “SLH”, set the high-temperature maxi=203°C (using the scroll
keys and the “SET” key)
- At “SLL”, set the low-temperature (mini 150°C)
- Validate with the “SET” key up to “CODE”, enter code “0” and set
back S L 4
and S L 5 at 1
- To exit press “SET” and “R/S” keys