15.6.2012
Rev. 1.7
Operating instructions
18
Closing the safety grid:
1.
Lift the safety grid lightly upwards and turn it after that down over the kettle.
2.
If necessary, switch the mixer on according to the instructions given below.
Opening of the whole safety lid:
1.
Switch off the mixer if it is on.
2.
Lift the safety lid by the black part of the lifting arm to its utmost position. The gas
spring will keep it in the open position.
3.
If the cover for the lid opening was on, it remains on the safety grid because of a
locking peg.
1. locking peg
Manual operation of the mixer
1.
Ensure that the emergency-stop button is not pressed down. If pressed, release it
by turning it clockwise until it jumps up.
2.
Switch on the power by turning the green mixer on-off switch lightly to the right
(the green indicator light illuminates).
3.
Start the mixer by pressing the start-stop button. The mixer starts at the lowest
speed.
4.
Choose the desired mixing speed.
5.
If desired, switch on the auto-reverse mode by pressing the auto-reverse button.
1.
start/stop button
2.
auto-reverse button
3.
mixing speed indicator light
4.
mixing speed increasing button
5.
mixing speed decreasing button
6.
mixer on-off switch
Summary of Contents for Culino Combi 40S
