Metos Culino Combi 40S, Installation And Operation Manual

Page: 25 / 58

15.6.2012 Rev. 1.7
Operating instructions
19
Operation of the pre-set mixing programs
The automatic mixing programs are pre-set and can not be changed. The programs will
start immediately when the desired button is pressed. You can at any time directly switch
over from one program to another program.
1. indicator light of pre-set mixing program
2. buttons of pre-set programs
Interrupting and continuing of mixing programs
The pre-set program can be interrupted by opening the safety grid or the safety lid. If the
mixing program has been interrupted, the green indicator light of the interrupted program
will begin to blink. When the safety grid and the safety lid are closed, you can continue
the program from the point of interruption by pressing the same button.
Stopping the mixing and pre-set programs
The mixing and the pre-set programs can be interrupted alternatively by pressing the
• start/stop button (1)
• emergency-stop button (2)
• or by turning the mixer on-off switch (3) to the 0 position.
1. start/stop button
2. emergency-stop button
3. mixer on-off switch
4. buttons of pre-set programs
The mixing program can also be stopped by pressing once again the pre-set mixing pro-
gram button while the program is running.