background image

15.6.2012

Rev.  1.7

Operating instructions

13

Changing the set temperature

1.

Press once either one of the temperature adjustment buttons. The digital display in-

dicates the set temperature (for five seconds).

2.

Choose the temperature by pressing the temperature increasing or decreasing but-

ton. When you keep the temperature button pressed down, the temperature changes

with one degree at a time. Release the button when the digital display indicates the

desired  set temperature.  After  approximately five seconds  the disp lay  switches

back to the actual temperature of the kettle.

Stopping the cooking

Turn the green on-off switch lightly to the left. The green indicator light goes off and the

kettle stops cooking.

The kettle tilts only if the kettle is switched on. Since the kettle chills slowly, you can stop

cooking and begin the simmering by decreasing the set temperature to e.g. +70°C.

The cooking will automatically stop when the kettle is tilted. The cooking goes on auto-

matically when the kettle is returned to an upright position.

4.2.2 Tilting the kettle

Open the safety lid of the kettle  before tilting and ensure that there is enough space for

tilting behind the kettle.

1.

The kettle is emptied by pressing the tilting button

2.

The kettle goes back to its upright position by pressing the upright position

button.

For  security  reasons, th e  kettle  tilts  only  when  the  tilting  button  is  kept  continuously

pressed.

Summary of Contents for Culino Combi 40S



























































Reviews: