Metos Culino Combi 40S, Installation And Operation Manual

Page: 34 / 58

15.6.2012 Rev. 1.7
Operating instructions
28
4.3 After use
4.3.1 Cleaning the kettle
Use of a high pressure hose for cleaning of the kettle is forbidden.
Cleaning the panel overlay with steam is prohibited!
Note that it is not allowed to spray the air inlets or the control panel with water when
cleaning the kettle with a spray gun.
Always clean the unit carefully immediately after use, considering the hygienic aspects.
Cleaning is more easy to do and needs less water in this way.
Recommended tools for cleaning:
• special cleaning detergents for stainless steel
• nylon brush
• soft rubbing sponge (white)
• other materials meant for stainless steel which do not scratch the surfaces of the
kettle
Tools not allowed for cleaning:
• high pressure hose
• all metallic tools
• rough rubbing sponge (green)
• steel wool
• abrasive detergents
Cleaning procedure:
1. Chill the kettle with cold water
2. Scrape the dirt with a plastic scraper.
3. Spray detergent in the kettle, brush and wash clean with a water hose
4. Dry the kettle
Clean the outer parts of the kettle using running water only if necessary. Do not use water
more than is necessary. Cleaning with a damp cloth will often be enough.
All optional extras of the kettle such as strainer plates, mixing tools and scrapers, cooking
baskets and parts of the safety lid can be washed in a dishwasher.
The dosing and impact time instructions for cleaning detergents must be followed - e.g.
exceeding the impact time for foam cleaning detergents in combination with salt residues
has been observed to cause severe spot corrosion even on stainless steel.
The manufacturer does not take any responsibility for possible damage caused by not fol-
lowing the instructions above.