Metos Culino Combi 40S, Installation And Operation Manual

Page: 43 / 58

15.6.2012 Rev. 1.7
Installation
37
5.6 Adjusting the tilting
Ensure that the kettle pillars are in a horizontal position. If not, adjust according to the in-
stallation instructions. Ensure that the rim of the kettle also is horizontal. If not, adjust the
tilting as follows.
The adjustment is done from the lower mounting point of the tilting motor as follows:
1. Open the locking screw
2. Open the locking nut.
Culino Combi 40-200 l Culino Combi 300 l, 400 l
1. locking screw
2. adjusting screw
3. Adjust with the adjusting screw which is inside the U-profile.
4. Lock with the screw and tighten with the nut.
5. Finally check that the roller plunger of the tilting limit switch trips when the kettle
is in an upright position.
1. roller plunger
2. tilting limit switch - cooking position
3. tilting limit switch - extreme position