Metos Culino Combi 40S, Installation And Operation Manual

Page: 16 / 58

15.6.2012 Rev. 1.7
Operating instructions
10
5. Keep the temperature increasing and decreasing buttons ("+" button and "–" but-
ton) simultaneously pressed until the display indicates 125°C and 1,5 bar. The
safety valve should now open and release steam. Release both temperature buttons.
NOTE! On kettles with jacket cooling C2 the test button on the right hand side of
the control pillar has to be kept pressed together with the + and the - buttons
1. kettle on-off switch
2. temperature adjustment buttons
1. Test button
If the safety valve does not open at the latest when the pressure gauge indicates 2 bar, the
power must immediately be switched off using the green on-off switch. Contact qual-
ified service personnel. It is not allowed to use the unit before it has been checked.
The safety valve function must be checked at least four times per year. The manufacturer
is not responsible for damage caused by n eglecting the regular checking of the safety
valve.