MAINTENANCE
74
a. If anti‑fouling protection is required for boat hull or boat
transom, copper or tin base paints can be used unless
otherwise prohibited by law.
b. If using copper or tin based anti‑fouling paints, avoid any
electrical interconnection between the Mercury Marine
Product, anodic blocks, and the paint by allowing a
minimum of 40 mm (1.5 in.) unpainted area on the transom
of the boat around these items.
a
b
6118
a -
Anti‑fouling paint
b -
Unpainted area
IMPORTANT: Corrosion damage that results from the improper
application of anti‑fouling paint will not be covered by the limited
warranty.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
