MAINTENANCE
53
3. Loosen the oil pump mounting bolts and remove the belt.
Using an electric drill, manually turn the oil pump pulley
(clockwise) to discharge any remaining engine oil into the
reservoir to be drained.
4. Drain the oil overflow canister into a suitable container.
a
7438
a -
Vent canister
5. To replace the spin‑on the oil filter:
b
a
7439
a -
Retaining clamp
b -
Stop screw
a. Loosen the filter retaining clamp "a" and slide it off the filter.
b. Place a container under the filter to catch oil.
c. Remove the spin‑on oil filter by turning it
counter‑clockwise.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
