MAINTENANCE
44
DRY SUMP SIX (VI) DRIVE, TRANSOM, TRIM & STEERING
SYSTEMS MAINTENANCE SCHEDULE
Interval
Task
Check prior to use and every 3 hours
of operation.
Drive, Transom, and Propeller ‑ Inspect
Lower Gear Housing Oil ‑ Check level
Power Trim Pump Oil ‑ Check level and
inspect for any water contamination.
Replace fluid if necessary.
Weekly
Anodes ‑ Inspect for erosion
Initial break‑in at 25 hours.
Lower Gear Housing Oil Filter and Oil ‑
Change the oil and filter.
Every 25 hours of operation or every
90 days, whichever occurs first.
Tie‑bar Mounting Bracket Nuts ‑ Inspect
and tighten to specifications as needed.
Propeller Shaft ‑ Lubricate
Propeller Nut ‑ Torque to specification.
Sterndrive ‑ Inspect, clean, and spray
with rust preventative.
Every 50 hours of operation or once
a season, whichever occurs first.
Perform 25 Hour Maintenance Items.
Sterndrive Unit Input Splines (Internal
and External) ‑ Lubricate with Optimol
Paste White T Grease.
Drive input shaft U‑joint crosses‑Inspect
and lubricate
Drive Mounting Nuts ‑ Tighten to
136 Nm (100 lb. ft.)
Saltwater Use:
Every 50 hours or 60
days of operation, whichever occurs
first.
Freshwater Use:
Every 100 hours or
120 days of operation, whichever
occurs first.
Steering System ‑ Inspect for loose,
damaged or missing parts. Lubricate the
steering cylinder pivot points.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
