MAINTENANCE
56
10.Using an electric drill motor, manually turn the oil pump pulley
(clockwise) to prime the engine oiling system until reaching an
oil pressure of 276 kPa (40 psi).
a
c
b
7443
a -
Oil pump pulley
b -
Clockwise direction of electric drill motor
c -
Electric drill motor
11.Add any additional oil to the reservoir to bring the oil level to
approximately 25.4 mm (1 in.) below the bottom of the
reservoir split ring.
12.Install the oil pump belt and tighten the pump mounting
fasteners. Tension the oil pump belt to
Specifications.
Description
N
lb.
Oil pump belt
When the belt can be twisted with two
fingers approximately 1/4 turn.
NOTE: Engine oil level in the reservoir will increase as the engine
oil temperature increases.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
