MAINTENANCE
45
Interval
Task
Every 100 hours of operation or once
a season, whichever occurs first.
Perform 25 and 50 Hour Maintenance
Items.
Drive Unit Bellows and Clamps ‑ Inspect
Lower Gear Housing Oil ‑ Change the oil.
Driveline Models ‑ Lubricate and inspect
the engine to transom driveshaft U‑joint
crosses and slip joint.
Steering head and remote control ‑
Inspect and lubricate
Every 200 hours of operation or at
re‑build.
Lower Gear Housing Oil Filter and Oil ‑
Change the oil and filter.
Every 200 hours of operation or once
a year, whichever occurs first.
Perform 25, 50, and 100 Hour
Maintenance Items.
Transom Input Shaft Bearing Housing
(Driveline Models Only) ‑ Change the oil.
Checking Fluid Levels
CHECKING ENGINE OIL (RESERVOIR)
Oil consumption is greatly dependant upon engine speed, with
consumption being highest at wide‑open‑throttle and decreasing
substantially as engine speed is reduced. It is not uncommon for
big block high performance engines to use up to one quart of oil in
one to five hours if the engine is operated continuously at the upper
end of the RPM range.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
