MAINTENANCE
75
NOTE: Do not paint anodes or the MerCathode System reference
electrode and anode, as this will render them ineffective as
galvanic corrosion inhibitors.
2.
Painting Drive Unit or Transom Assembly
• Paint the drive unit and transom assembly with a good
quality marine paint or an anti‑fouling paint that does not
contain copper, tin, or any other material that could conduct
electrical current. Do not paint drain holes, anodes, or items
specified by the boat manufacturer.
3.
Additional Corrosion Prevention Tips
• Spray the power package components on the inside of the
boat every two to three weeks with Corrosion Guard to
protect the finish from dulling and corrosion. External
power package components may also be sprayed.
Tube Ref No.
Description
Where Used
Part No.
120
Corrosion Guard
Power package
92-802878-5
5
• All lubrication points, especially the steering system and
shift and throttle linkages, should be kept well lubricated.
• Flush the cooling system after each use.
Battery
All lead acid batteries discharge when not in use. Recharge every
30 to 45 days, or when specific gravity drops below battery
manufacturer's specifications.
Refer to specific instructions and warnings accompanying your
battery. If this information is not available, observe the following:
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
