OPERATION
26
In an emergency, if you cannot locate and correct the cause of the
high current draw, and you must operate the engine; perform the
following:
1. Turn "OFF" or disconnect all accessories connected to the
engine and instrumentation wiring and reset the circuit
breaker.
2. If the breaker remains open, electrical overload is still present.
Inspect the electrical system.
The power trim system is protected by a 10 amp fuse in the power
trim RED (Hot) wire.
a
7416
a -
10 amp fuse
A 90 amp fuse is located on the starter.
a
7417
a -
90 amp fuse
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
