MAINTENANCE
54
d. Coat the new filter sealing ring with new oil and install it
hand tight. Do not over tighten.
e. Install the filter retaining clamp "a" so that the clasp of the
retaining clamp is against the stop screw "b" to secure the
filter during operation. Tighten the clamp.
6. Remove the cover of the Oberg screen‑style filter and mark
the element so it can be returned to its original orientation with
the correct side up. Clean the element with solvent.
IMPORTANT: The screen‑style filter element must always be
returned to its original orientation (correct side up) to prevent the
oil from flowing through it in the wrong direction.
a
7441
a -
Oberg screen‑style filter
7. Re‑assemble the filter assembly, making sure that the screen
is installed with the up side in the proper orientation.
NOTE: Engine to reservoir oil line lengths affect total oil capacity
and will vary with each installation
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
