MAINTENANCE
47
Check The Input Shaft Housing Oil Level On Driveline Models As Follows:
1. Remove the reservoir level pipe plug "c." The oil level should
be even with the bottom of the hole. If low, fill the input shaft
housing "b" through the top fill pipe plug hole "a" until oil flows
from the reservoir level plug hole "c."
a
b
c
7428
150
a -
Fill pipe plug hole
b -
Input shaft housing
c -
Reservoir level pipe plug
Tube Ref No.
Description
Where Used
Part No.
150
Torco MTF Gear Oil
Driveline Models
Transom Assembly
Input Shaft
92-849684-1
2. Re‑install the reservoir level pipe plug and the top fill plug.
Summary of Contents for HP1200 SCi Dry Sump
Page 4: ...iv...
Page 8: ...viii...
Page 86: ...MAINTENANCE 78 Date Maintenance Performed Engine Hours...
