Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 52 / 354

To unlock: with the doors closed, press button

To lock: with the doors closed, press button

Activating/deactivating the automatic locking
mechanism

Requirements:

The power supply or the vehicle has been

switched on.

The doors are closed.

When the automatic locking mechanism is activa-

ted and the vehicle is traveling at a speed above

9 mph (15 km/h), the vehicle is locked automati-

cally.

Central locking buttons (vehicles with electrically

adjustable front seats)

Central locking buttons (vehicles with manually

adjustable front seats)

If the vehicle is being tow-started, push-started or

tested on a roller dynamometer, there is a risk of

being locked out when the function is activated.

To activate: press and hold button

until you

hear a tone.

To deactivate: press and hold button

until

you hear a tone.

Automatic locking after closing the last door

WARNING Risk of fatal injury due to expo-

sure to extreme heat or cold in the vehicle

If persons, particularly children, are subjected

to prolonged exposure to intense heat or cold,

there is a risk of severe injury or even death.

Never leave persons, particularly chil-

dren, unattended in the vehicle.

WARNING Risk of accident and injury due

to children left unattended in the vehicle

If children are left unsupervised in the vehicle,
they could, in particular:

open doors, thereby endangering other

persons or road users.

get out and be struck by oncoming traffic.

operate vehicle equipment and become

trapped, for example.

In addition, the children could also set the
vehicle in motion, for example by:

releasing the parking brake.

changing the transmission position.

starting the vehicle.

Never leave children unattended in the

vehicle.

When leaving the vehicle, always take the

SmartKey with you and lock the vehicle.

Keep the vehicle SmartKey out of reach

of children.

WARNING Accident‑ and risk of injury with

unsecured or unattended animals in

parked vehicle

If you leave animals in the vehicle unattended

or unsecured, they could possiblypress buttons

or switches.

Opening and closing

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands