Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 303 / 354

Display messages

Introduction

▌

Function of display messages

Display messages appear on the instrument clus-

ter.
The display messages with graphic displays can be

displayed in simplified format in the Operator's

Manual and may deviate from the display on the

instrument cluster. The instrument cluster shows

high-priority display messages in red. In addition, a

warning tone sounds for specific display mes-

sages.
Act in accordance with the display messages and

comply with the additional instructions in this

Operator's Manual.
In addition, symbols are shown for some display
messages:

Further information

Hide display messages

You can use the left-hand Touch Control to select

between the symbols by swiping to the left or right.

Pressing

displays further information on the

instrument cluster. Pressing

hides the display

message.
You can hide low-priority display messages by

pressing the

button or with the left-hand

Touch Control. The display messages are saved in

the message memory.
Rectify the cause of a display message as quickly

as possible.
You cannot hide high-priority display messages.

The instrument cluster will show these display

messages until their causes have been rectified.

▌

Calling up saved display messages

On-board computer:

Service

1 Message

If there are no display messages,

No Messages

will

appear on the instrument cluster display.

Browse through the display messages by swip-

ing upwards or downwards on the left-hand

Touch Control.

To exit the message memory: press the

button.

Display messages and warning and indicator lamps 301

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands