Mercedes-Benz Sprinter Page 85 Operating Instructions Manual Download

Page: 85 / 354

NOTE Damage to the mobile phone stow-

age compartment caused by liquids

If liquids enter the mobile phone stowage com-

partment, the compartment may be damaged.

Ensure that no liquids enter the mobile

phone stowage compartment.

Observe the following notes on wireless charging:

The charging function is only available when

the drive system has been started.

In some cases, it may not be possible to

charge small mobile phones at every position

of the mobile phone compartment.

It may not be possible to charge large mobile

phones that do not rest in the mobile phone

receptacle.

The mobile phone can warm up during the

charging process. This depends on the applica-

tions (apps) currently running.

For more efficient charging, the protective

case should be removed from the mobile

phone. Protective cases designed for wireless

charging are an exception.

When charging, the mat should be used if pos-

sible.

Charging the mobile phone wirelessly in the front

Requirements:

The mobile phone must be suitable for wireless

charging.

Open the flap of stowage compartment

above the media display.

Place the mobile phone as centrally as possi-

ble with the display facing upwards on the

marked surface of mat

When the charging symbol is shown in the mul-

timedia system, the mobile phone is being

charged.

Malfunctions during charging are shown in the

media display of the multimedia system.

The mat can be removed for cleaning, e.g.

using clean, lukewarm water.

Installing or removing the floor mats

WARNING Risk of accident due to objects

in the driver's footwell

Objects in the driver's footwell may impede

pedal travel or block a depressed pedal.
This jeopardizes the operating and road safety

of the vehicle.

Stow all objects in the vehicle securely

so that they cannot get into the driver's

footwell.

Always install the floor mats securely and

as prescribed in order to ensure that

there is always sufficient room for the

pedals.

Do not use loose floor mats and do not

place floor mats on top of one another.

To install: press pushbuttons

onto holders

To remove: pull the floor mats off holders

Seats and stowage

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands