Mercedes-Benz Sprinter Page 318 Operating Instructions Manual Download

Page: 318 / 354

Display messages

Possible causes/consequences and

Solutions

WARNING Risk of an accident due to insufficient tire pressure

Tire pressures that are too low pose the following hazards:

The tires may burst, especially as the load and vehicle speed

increase.

The tires may wear excessively and/or unevenly, which may

greatly impair tire traction.

The driving characteristics, as well as steering and braking,

may be greatly impaired.

You could then lose control of the vehicle.

Observe the recommended tire pressure.

Adjust the tire pressure if necessary.

Stop in accordance with the traffic conditions.

Check the tire pressure (

page 244) and the tires.

Please Correct Tire Pres-

sure

* The pressure in at least one tire is too low or the pressures of the indi-

vidual tires deviate too much from each other.

Check the tire pressure, and add air if necessary.

When the tire pressure has been set correctly, re-start the tire

pressure monitor (

page 250).

Tire Pressure Monitor

Inoperative

* The tire pressure monitor is malfunctioning.

Visit a qualified specialist workshop.

Key

Display messages

Possible causes/consequences and

Solutions

Don't Forget Your Key

* This message reminds you not to leave your SmartKey in the vehicle.

Take the SmartKey with you when you get out of the vehicle.

Place the Key in the

Marked Space See Oper-

ator's Manual

* SmartKey detection is malfunctioning.

Change the SmartKey's position in the vehicle.

Start the vehicle with the SmartKey in the marked space

(

page 110).

Key Not Detected

(red

display message)

* The key is not detected and may no longer be in the vehicle.

The key is no longer in the vehicle and you switch off the vehicle:

You can no longer start the vehicle.

You cannot lock the vehicle centrally.

Ensure that the key is in the vehicle.

316 Display messages and warning and indicator lamps

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands