Mercedes-Benz Sprinter Page 201 Operating Instructions Manual Download

Page: 201 / 354

Only one mobile phone at a time can be connected
via Apple CarPlay

to the multimedia system.

The availability of Apple CarPlay

may vary accord-

ing to the country.
The service provider is responsible for this applica-

tion and the services and content connected to it.
Apple CarPlay

is a registered trademark of Apple

Inc.

▌

Information on Apple CarPlay

When Apple CarPlay

is being used, the iPod

media source is not available for the respective
iPhone

Requirements:

The multimedia system is equipped with the

function.

The current version of your device's operating

system is being used (see the manufacturer's

operating instructions).

The full range of functions for Apple CarPlay

is only available with an Internet connection.

Connect the iPhone

to the

USB port on

the multimedia system using a suitable cable

(

page 202).

If no other device is connected with the system
via Bluetooth

: confirm the data protection

provisions.

If another device is connected via Bluetooth

or Apple CarPlay

(wireless) with the system:

tap on the

Tap here to start Apple CarPlay

for: <Mobile phone>

message.

Select the iPhone

in the

device list

under the application.
The previous connection via Bluetooth

Apple CarPlay

(wireless) is disconnected. The

device newly connected via cable is active.

Accepting/rejecting the data protection provisions
A message with the data protection provisions

appears.

Select

Accept & Start

Exiting Apple CarPlay

Press the

button.

If Apple CarPlay

was not displayed full-screen

before disconnecting, the application starts in

the background when reconnected. You can
call up Apple CarPlay

in the main menu.

▌

Calling up Apple CarPlay

sound settings

Multimedia system:

Smartphone

Apple CarPlay

Select sound settings.

▌

Ending Apple CarPlay

To end the connection of Apple CarPlay

(cable): disconnect the connection via the con-
necting cable between the iPhone

and multi-

media system.

To end the connection of Apple CarPlay

(wire-

less): de-authorize the iPhone

in the

device list under the application.

Regardless of whether the connection is via

cable or wireless, Mercedes-Benz recom-

mends disconnection only when the vehicle is

stationary.

Android Auto

▌

Android Auto overview

WARNING Risk of distraction from infor-

mation systems and communications

equipment

If you operate information systems and com-

munication devices integrated in the vehicle

when driving, you could be distracted from the

traffic situation. This could also cause you to

lose control of the vehicle.

Only operate this equipment when the

traffic situation permits.

If you cannot be sure of this, stop the

vehicle whilst paying attention to road

and traffic conditions and operate the

equipment with the vehicle stationary.

You must observe the legal requirements for the

country in which you are currently driving when

operating the multimedia system.
Mobile phone functions can be used with Android

Auto using the Android operating system on the

multimedia system. It is operated using the

touchscreen or voice control. You can activate the

voice control by pressing and holding the

button on the multifunction steering wheel.
Only one mobile phone at a time can be connected

via Android Auto to the multimedia system.

MBUX multimedia system 199

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands