Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 314 / 354

Display messages

Possible causes/consequences and

Solutions

Top up engine oil (

page 215).

Observe the notes on engine oil (

page 290).

Stop Vehicle Leave

Engine Running

* The battery's condition of charge is too low.

Stop the vehicle immediately in accordance with the traffic condi-

tions. Do not continue driving!

Leave the vehicle running.

Do not continue driving until the display message goes out.

Stop Vehicle See Opera-

tor's Manual

* The battery is no longer being charged and has reached an exces-

sively low battery charge level.

NOTE Possible engine damage if you continue driving

Do not continue driving under any circumstances.

Consult a qualified specialist workshop.

Stop the vehicle immediately in accordance with the traffic condi-

tions. Do not continue driving!

Switch off the vehicle.

Consult a qualified specialist workshop.

Start Engine See Opera-

tor's Manual

* The vehicle is off and the condition of charge is too low.

Switch off electrical consumers that are not required.

Leave the vehicle running for a few minutes, or drive an extended

distance.

The battery will be charged.

See Operator's Manual

* The battery is no longer being charged.

NOTE Possible engine damage if you continue driving

Do not continue driving under any circumstances.

Consult a qualified specialist workshop.

Stop the vehicle immediately in accordance with the traffic condi-

tions and switch it off.

Consult a qualified specialist workshop.

Coolant Stop Vehicle

Switch Off Engine

* The coolant is too hot.

Stop the vehicle immediately in accordance with the traffic condi-

tions and switch it off.

WARNING Risk of burns when opening the hood

If you open the hood in the event of an overheated engine or fire
in the engine compartment, the following situations may occur:

You may come into contact with hot gases.

You may come into contact with other escaping hot operating

fluids.

Before opening the hood, allow the engine to cool down.

312 Display messages and warning and indicator lamps

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands