Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 231 / 354

Do not lean over the battery.

Do not inhale battery gases.

Keep children away from the battery.

Immediately rinse battery acid off thor-

oughly with plenty of clean water and

seek medical attention immediately.

ENVIRONMENTAL NOTE Environmental

damage due to improper disposal of bat-

teries

Batteries contain pollutants. It is

illegal to dispose of them with the household

rubbish.

Dispose of batteries in an

environmentally responsible manner.

Take discharged batteries to a qualified

specialist workshop or to a collection

point for used batteries.

Consult a qualified specialist workshop to connect

the battery.
Observe the safety notes and protective measures

when handling batteries.

Risk of explosion

Fire, open flames and smoking are pro-

hibited when handling the battery.

Avoid creating sparks.

Electrolyte or battery acid is corrosive.

Avoid contact with the skin, eyes and

clothing. Wear suitable protective

clothing, in particular gloves, an apron

and a safety mask. Immediately rinse

electrolyte acid splashes off with clean

water. If necessary, seek medical

advice.
Wear eye protection.

Keep children at a safe distance.

Observe these Operating Instructions.

If you do not use the vehicle for a long period or
drive short distances regularly:

Connect the battery to a charger recommen-

ded for Mercedes-Benz

Consult a qualified specialist workshop to dis-

connect the battery

Starting assistance and charging the starter bat-
tery

Always use the jump-start connection in the

engine compartment for starting assistance

and when charging the battery.

NOTE Damage to the battery from over-

voltage

When charging using a battery charger without

a maximum charging voltage, the battery or the

on-board electronics may be damaged.

Only use battery chargers with a maxi-

mum charging voltage of 14.8 V.

WARNING Risk of explosion due to the

ignition of hydrogen gas

If there is a short circuit or sparks are created,

there is a danger of hydrogen gas igniting when

you charge the battery.

Make sure that the POSITIVE terminal of

a connected battery does not come into

contact with vehicle parts.

Never place metal objects or tools on a

battery.

When connecting and disconnecting the

battery, always observe the sequence of

battery terminals described.

During starting assistance, always take

care to connect only battery terminals of

identical polarity.

During starting assistance, observe the

sequence described for connecting and

disconnecting the jumper cables.

Breakdown assistance 229

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands