Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 112 / 354

▌

Starting vehicle (Remote Online)

WARNING Risk of crushing or entrapment

due to unintentional starting of the engine

Limbs could be crushed or trapped if the

engine is started unintentionally during service

or maintenance work.

Always secure the engine against unin-

tentional starting before carrying out

maintenance or repair work.

Requirements

The park position

is engaged.

The anti-theft alarm system is not activated.

The panic alarm is not activated.

The hazard warning light system is switched

off.

The hood is closed.

The doors are closed and locked.

Start the vehicle using the smartphone.

After every vehicle start, the engine runs for

ten minutes.

You can carry out a maximum of two consecutive

starting attempts. The vehicle must be started

once with the key before trying to start the vehicle

again with the smartphone. You can stop the vehi-

cle again at any time.

Further information can be found in the smart-

phone app.

To prevent the engine from starting before carrying
out maintenance or repair work:

Switch on the hazard warning light system.

Unlock the doors.

Open a side window or the soft top.

▌

Starting the vehicle in emergency operation

mode

WARNING Risk of accident and injury due

to children left unattended in the vehicle

If children are left unsupervised in the vehicle,
they could, in particular:

open doors, thereby endangering other

persons or road users.

get out and be struck by oncoming traffic.

operate vehicle equipment and become

trapped, for example.

In addition, the children could also set the
vehicle in motion, for example by:

releasing the parking brake.

changing the transmission position.

starting the vehicle.

Never leave children unattended in the

vehicle.

When leaving the vehicle, always take the

SmartKey with you and lock the vehicle.

Keep the vehicle SmartKey out of reach

of children.

If the vehicle does not start and the

Place Key in

Marked Space See Operator's Manual

display

message appears in the instrument cluster, you

can start the vehicle in emergency operation

mode.

Remove key

from your key ring.

Insert key

in the slot.

The vehicle is started after a brief time.

110 Driving and parking

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands