#
Press in the catch spring of lens
1
with a
suitable object e.g. a screwdriver, and then
lever off the lens with the lamp housing.
#
To pull back lens from the lamp housing:
press the lugs of the lens
2
inwards.
#
Remove light bulb
3
from the lamp housing.
#
Insert the new light bulb.
#
Insert the lens in the lamp housing until it
engages.
#
Place the lens with the lamp housing in posi‐
tion and engage it.
Windscreen wipers
Switching the front windscreen wipers on
and off
1
î
Single wipe/wiping with washer fluid
1 g
Windscreen wipers off
2
Ä
Intermittent wiping, normal
Vehicles with rain sensors: automatic wiping,
normal
3
Å
Intermittent wiping, frequent
Vehicles with rain sensors: automatic wiping,
frequent
4
°
Continuous wiping, slow
5
¯
Continuous wiping, fast
#
Turn the combination switch to the corre‐
sponding position
1
–
5
.
#
Single wipe/washing: press the button on
the combination switch in the direction of
arrow
1
.
R
í
Single wipe
R
î
Wiping with washer fluid
Switching the rear window wipers on/off
1
ô
Single wipe/wash
2
è
Intermittent wiping
#
Single wipe: press button
1
to the point of
resistance.
#
Wiping with washer fluid: press button
1
beyond the point of resistance.
#
To switch intermittent wiping on or off:
press button
2
.
If the rear window wiper is switched on, the
è
symbol will appear on the instrument
display.
Replacing the windscreen wiper blades
&
WARNING Risk of becoming trapped if
the windscreen wipers are switched on
while wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
#
Always switch off the windscreen wip‐
ers and ignition before changing the
wiper blades.
&
WARNING Risk of injury from using the
windscreen wipers while the engine bon‐
net is open
When the engine bonnet is open, and the
windscreen wipers are set in motion, you can
be trapped by the wiper linkage.
#
Always switch off the windscreen wip‐
ers and ignition before opening the
engine bonnet.
Light and vision
97
