#
Press the
4
button.
#
Set the minutes with button
1
or
3
.
#
Press the
4
button.
Setting the time format
#
Press button
1
or
3
until
4
flashes on
the menu bar
2
.
#
Press the
4
button.
#
Press button
1
or
3
until the symbol for
the time format flashes.
#
Press the
4
button.
#
Select the desired time format using button
1
or
3
.
#
Press the
4
button.
Setting the day
#
Press button
1
or
3
until
4
flashes on
the menu bar
2
.
#
Press the
4
button.
#
Press the
1
or
3
button until the symbol
for the day flashes.
#
Press the
4
button.
#
Use the
1
or
3
button to select the
required day of the week.
#
Press the
4
button.
Switching immediate heating mode on/off
#
To switch on: press button
4
until
y
flashes on menu bar
2
.
On
briefly appears on the display and then
the remaining operating duration or the
à
symbol for continuous operation.
#
To switch on: press button
4
until
Off
appears on the display.
Setting the departure time
You can set three departure times with the switch
clock. Following malfunctions or if the battery
has been disconnected, you will need to re-set
the departure times.
#
To set the departure time: press the
1
or
3
button until
j
flashes on the
2
menu
row.
#
Press the
4
button.
The numbers of the program memories are
shown in the program column
5
. The tick
denotes activated program memories.
#
Use the
1
or
3
button to select the
required program memory.
#
Press the
4
button.
#
To activate/deactivate program memo‐
ries: use the
1
or
3
button to select
On
or
Off
.
#
Press button
4
.
#
To edit the program memory: use the
1
or
3
button to select
4
.
#
Press the
4
button.
#
Set the day of the week and the time
(
/
page 111).
Setting the temperature and operating dura‐
tion
#
Press the
4
button.
#
Set the temperature with button
1
or
3
.
#
Press the
4
button.
#
Set the operating duration with button
1
or
3
or select the
à
symbol for continuous
operation.
#
Press the
4
button.
%
The operating duration set is the default set‐
ting for immediate heating mode. You can set
the operating duration within a range of 10 to
120 minutes or to continuous operation.
Problems with the auxiliary warm-air heater
Problem
Possible causes/consequences and
M
Solutions
The message
ERROR
appears on the switch
clock's display.
A malfunction has occurred.
#
Have the auxiliary heating checked at a qualified specialist work‐
shop.
The message
INIT
appears on the switch
clock's display.
The power supply has been interrupted. All saved settings have been
deleted.
Automatic hardware detection is currently active.
112 Climate control
