In automatic mode, the temperature, airflow and
air distribution are regulated and kept constant.
#
Press the
/
Y
button.
#
Press the
Ã
button.
%
Even if the front-compartment system is in
automatic mode, the rear-compartment sys‐
tem can exit automatic mode if you adjust
the blower on the rear-compartment menu.
%
If the air is cooled and the driver, front
passenger or sliding door is opened, the rear
air conditioning system blower is turned
down after around 15 minutes.
When all doors have been closed again, the
blower will be reset to the previous setting
after around one minute.
Information on the air distribution settings
The symbols on the display indicate the vents
through which the air is being directed.
TEMPMATIC
R
b
Defroster and centre vents
R
_
All vents
R
P
Centre vents
R
S
Centre and footwell vents
THERMOTRONIC
R
¯
Defroster vents
R
b
Defroster and centre vents
R
_
All vents
R
a
Defroster and footwell vents
R
P
Centre vents
R
S
Centre and footwell vents
R
O
Footwell vents
Setting the air distribution
Requirements:
R
The climate control system is switched on.
#
Press the
_
button repeatedly until the
desired air distribution appears in the air con‐
ditioning system display.
Switching the synchronisation function on
and off
Requirements:
R
The climate control system has been
switched on (
/
page 103).
The synchronisation function controls the climate
control function centrally. The settings for the
temperature and airflow in the front zone are
automatically adopted for the rear zone.
#
Press the
0
button.
%
If the rear-compartment climate control has
been switched off, you can switch it on auto‐
matically by pressing the
0
button.
Demisting the windows
Misting on the inside of windows
#
Press the
¬
button.
When the windscreen defroster is switched
on, the temperature and airflow cannot be
adjusted.
#
In vehicles with a heating system and a man‐
ual air-conditioning system, also close the
side and centre air vents (
/
page 106) as
well as the air vents for the rear compartment
(
/
page 107).
#
Vehicles with TEMPMATIC or
THERMOTRONIC: press the
¿
button
and, if necessary, use the
_
button to
direct the air onto the windscreen
¯
.
#
Increase the airflow as necessary and close
all air vents (
/
page 106).
#
If the windows remain misted up: press
the
¬
button.
When the windscreen defroster is switched
on, the temperature and airflow cannot be
adjusted.
¬
or no symbol will appear on the climate
control system display.
#
Vehicles with windscreen heating: press
the
button.
#
Close the centre air vents (
/
page 106) and
air vents for the headroom (
/
page 107) and
rear compartment (
/
page 107).
Climate control 105
