Mercedes-Benz E-Class Sedan, Operator'S Manual

Page: 54 / 498

As a result, child restraint systems cannot
perform their intended protective function.
Rear seat backrests that are not locked can
also cause additional injuries, e.g. in the
event of an accident. This poses an
increased risk of injury or even fatal injury.
#
Always lock the rear seat backrests
after installing the Top Tether belts.
#
Observe the lock verification indicator.
If the seat backrest is not engaged and locked,
this will be shown in the multifunction display in
the instrument cluster.
The risk of injury can be reduced by Top Tether
as Top Tether provides an additional connection
between the child restraint system secured with
LATCH-type (ISOFIX) and the vehicle.
The child restraint system must be equipped
with a Top Tether belt.
#
If necessary, move head restraint 1
upwards (
→
page 90).
#
Fold up cover 2 of Top Tether anchorage
3 .
#
Install the LATCH-type (ISOFIX) child restraint
system with Top Tether. Always comply with
the child restraint system manufacturer's
installation instructions when doing so.
#
Route Top Tether belt 5 under head
restraint 1 between the two head restraint
bars.
#
Hook Top Tether hook 4 of Top Tether belt
5 without twisting into Top Tether anchor‐
age 3 .
#
Tension Top Tether belt 5 . Always comply
with the child restraint system manufactur‐
er's installation instructions when doing so.
#
Fold down cover 2 of Top Tether anchorage
3 .
#
If necessary, move head restraint 1 down‐
wards (
→
page 90). Make sure that you do
52 Occupant safety