Mercedes-Benz E-Class Sedan, Operator'S Manual

Page: 118 / 498

Switching on high beam manually
#
Vehicles with Adaptive Highbeam Assist:
Turn the light switch to the L position.
R
Press the combination switch beyond the
pressure point in the direction of
arrow 1 .
When high beam is activated, the indicator lamp
for low beam is deactivated and replaced by the
indicator lamp for high beam.
#
To switch off high beam: move the combi‐
nation switch back to its starting position.
#
To indicate briefly: press the combination
switch briefly up to the pressure point in the
direction of arrow 2 or 4 .
The corresponding turn signal light flashes
three times.
#
To indicate permanently: press the combi‐
nation switch beyond the pressure point in
the direction of arrow 2 or 4 .
Activating/deactivating the hazard warning
light
#
Press button 1 .
Cornering light
Cornering light function
Cornering light improves the illumination of the
road over a wide angle in the turning direction,
enabling better visibility in tight bends, for exam‐
ple. It can only be activated when low beam is
switched on.
The function is active:
R
At speeds below 25 mph (40 km/h) when
the turn signal light is switched on or the
steering wheel is turned.
116 Light and visibility