Mercedes-Benz E-Class Sedan, Operator'S Manual

Page: 151 / 498

&
WARNING Risk of injury and entrapment
when opening the garage door using the
garage door opener
When you operate or program the garage
door with the integrated garage door opener,
persons in the range of movement of the
garage door can become trapped or struck
by the garage door.
#
When using the integrated garage door
opener, always make sure that nobody
is within the sweep of the garage door.
Only operate the garage door opener on the fol‐
lowing garage doors:
R
Garage doors with a safety stop and revers‐
ing feature.
R
Garage doors which conform to the current
U.S. safety standards.
Prior to programming a garage door opener, park
the vehicle outside the garage and switch off the
engine.
#
Check if the transmitter frequency of the
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
R
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
#
Press and hold button 1 , 2 or 3 that you
wish to program.
Indicator lamp 4 flashes yellow.
% It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
#
Release the previously pressed button.
Indicator lamp 4 continues to flash yellow.
#
Point remote control 5 at a distance of 1 in
(1 cm) to 3 in (8 cm) towards buttons 1 , 2
or 3 .
#
Press and hold button 6 of remote control
5 until:
R
Indicator lamp 4 lights up green contin‐
uously. Programming is complete.
R
Indicator lamp 4 flashes green. Pro‐
gramming was successful. Additionally,
synchronization of the rolling code with
the garage door system must also take
place.
#
If indicator lamp 4 does not light up or flash
green: repeat the procedure.
#
Release all of the buttons.
Driving and parking 149