Mercedes-Benz 2006 C 230 Sport Page 56 Operator'S Manual Download

Page: 56 / 474

Getting started

Driving

Single wipe

왘

Press the combination switch briefly in
direction of arrow

to the resistance

point.

The windshield wipers wipe one time
without washer fluid.

Wiping with windshield washer fluid

왘

Press the combination switch in direc-
tion of arrow

past the resistance

point.

The windshield wipers operate with
washer fluid.

For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system*”
(

컄

page 303).

To prevent smears on the windshield,
wipe with windshield washer fluid every
now and then even when it is raining.

If anything blocks the windshield
wipers (leaves, snow, etc.), switch
them off immediately.

앫

For safety reasons, stop the vehicle
in a safe location and remove
SmartKey from starter switch
before attempting to remove any
blockage.

앫

Remove blockage.

앫

Turn the windshield wipers on
again.

If the windshield wipers fail to function
at all with combination switch in
position

앫

set the combination switch to the
next higher wiper speed

앫

have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands