Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download Page 246

Page: 246 / 474

245

Controls in detail

Power tilt/sliding sunroof*

왘

Switch on the ignition (

컄

page 33).

Opening and closing the power
tilt/sliding sunroof

왘

To open, close, raise, or lower the
tilt/sliding sunroof, move the sunroof
switch to resistance point in the
required direction of arrows

Release the sunroof switch when the
tilt/sliding sunroof has reached the
desired position.

Fully opening (Express-open) and
closing (Express-close) the power
tilt/sliding sunroof

왘

To open or close the tilt/sliding
sunroof, move the sunroof switch past
the resistance point in the required
direction of arrow

and

release.

The tilt/sliding sunroof opens or closes
completely.

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it

with you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. Unsuper-

vised use of vehicle equipment can cause an

accident and/or serious personal injury.

To avoid damaging the seals, do not
transport any objects with sharp edges
which can stick out of the tilt/sliding
sunroof.

Do not open the tilt/sliding sunroof if
there is snow or ice on the roof, as this
could result in malfunctions.

The tilt/sliding sunroof can be opened
or closed manually should an electrical
malfunction occur (

컄

page 393).

You can also open or close the tilt/slid-
ing sunroof using the SmartKey, see
“Summer opening feature”
(

컄

page 243) and “Convenience clos-

ing feature” (

컄

page 243).

Depending on current position, the
tilt/sliding sunroof may also open or
close when the air recirculation
button

in the control panel of the

climate control (

컄

page 177) or auto-

matic climate control* (Canada only)
(

컄

page 192), or the charcoal filter

button

in the control panel of the

automatic climate control* (Canada
only) (

컄

page 194) is pressed and held.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Brands by name

Popular brands