Mercedes-Benz 2006 C 230 Sport Page 40 Operator'S Manual Download

Page: 40 / 474

Getting started

Adjusting

Seat cushion tilt

왘

Press switch up or down in direction of
arrow

until your upper legs are

lightly supported.

Seat backrest tilt

왘

Press switch forward or backward in
direction of arrow

until your arms

are slightly angled when holding the
steering wheel.

Seat height

왘

Press switch up or down in direction of
arrow

Head restraint height

왘

Press switch up or down in direction of
arrow

Head restraint tilt

Manually adjust the angle of the head
restraint.

왘

Push or pull on the lower edge of the
head restraint cushion.

For more information, see “Seats”
(

컄

page 109).

Adjust the head restraint in such a way
that it is as close to the head as
possible.

Warning!

For your protection, drive only with properly

positioned head restraints.

Adjust head restraint so that the head re-

straint supports the back of the head at eye

level. This will reduce the potential for injury

to the head and neck in the event of an ac-

cident or similar situation.

Do not drive the vehicle without the seat

head restraints. Head restraints are

intended to help reduce injuries during an

accident.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands