Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 389 / 474

388

Practical hints

Where will I find ...?

In case of a flat tire, you may temporarily
use the Minispare wheel when observing
the following restrictions:

앫

Do not exceed a vehicle speed of
50 mph (80 km/h).

앫

Drive to the nearest tire repair facility
to have the flat tire repaired or
replaced as appropriate.

앫

Do not operate vehicle with more than
one Minispare wheel mounted.

For more information, see “Rims and Tires”
(

컄

page 432).

Spare wheel bolts

Wheel bolt for light alloy rims

Wheel bolt for Minispare wheel or other
steel rims (located in trunk with spare
wheel)

Wheel bolts

must be used when

mounting the Minispare wheel or other
steel rims. The use of any wheel bolts
other than wheel bolts

for the

Minispare wheel or other steel rims will
physically damage the vehicle’s
brakes.

Warning!

Make sure to use the original length wheel

bolts when remounting the original wheel

after it has been repaired.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands